Tips on How to Build a Freestanding Deck by Yourself

  1. Laying the Foundation

One of the most expedient ways of supporting the decking structure is to build a durable foundation with the use of a concrete. As a matter of fact, the deck frame will include vertical posts which measure 6×6 or 4×4. Each post must stand on a variety of concrete footing. In order to build a strong and durable footing which will support the entire structure’s weight, you need to pour the material into twelve-inch diameter cylindrical cardboard materials then place them into the holes dug with depth just enough to support the decking structure. 

A 3×3 feet pad composed of concrete is necessary for landing purposes, and must be fitted right underneath the staircase. You need to install your deck exactly according to plan, therefore, you should picture the proper position for the staircase to stand. Then, it is time for you to pour the concrete pad over the four-inch layer of gravel you’d prepared a while ago. The thickness of the concrete pad must measure anywhere between four to six inches. This is actually the most acceptable measurement suggested by the local safety codes thus, you must not take them for granted. 

  1. Time to Build the Posts

You must secure your posts to the bracket. That bracket is ideally anchored onto your footing. When the concrete is set, secure the bracket to the bolt with a nut. In addition to that, you must also make sure that the posts are attached to the bracket with the use of ordinary galvanized nails. Then, make sure that the posts are firm enough before you start to work on the deck frames to avoid total collapse. You may also want to check the firmness of the posts on a regular basis. 

  1. Assembling the Deck Frames of Your Structure and Making Them Stand

The deck is actually supported by ribbon joists or horizontal bands that are firmly fastened together with your posts at the right heights. If you are installing a huge deck, you will require cross beams in order to directly support the posts. The ribbon joists are assumed to run in the way which appears parallel to the structure’s dimensions. 

Decking usually comes in regular dimensions of 1.25 by 6 inches. Aside from that, the decking is basically fastened into the bolt with sixteen galvanized nails. If you want, you can buy decking screws, though it is not needed if you are just comfortable with galvanized nails. 

  1. Final Touches

Your deck requires to look finish after you have made it stand securely. Then, now is the time when you need to trim off the excess or protruding wood on the corners of your decking. To do it properly, you may need to draw a line as a guide for accurate cutting. You want also everything to look in good proportion and dimension. And lastly, you should pick dry straight boards without the presence of large knots. If you want to know more information about how to build a deck, contact a Charlotte deck maintenance service provider. 

Submit a Comment

Your email address will not be published. Required fields are marked *